Stationary Ultrasonic Water Flow Meter
The FLUXUS WD Series non-invasive ultrasonic flow meter is the ideal solution for metering points in the drinking water netork.
Due to the use of its clamp-on technology, the WD Series that does not require any work that affects the integrity of the pipe. This enables a very simple and cost-effective installation of flow measurement points within an existing water supply network.
The FLUXUS WD Series belongs to the most reliable and accurate non-invasive ultrasonic flow metering systems - it even measures flow rates as low as 0.01 m/s. The inaccuracy of other meter technologies, such as magnetive inductive meters, can increase so dramatically in the low flow range, that they are unsuitable for monitoring minimum night flows. But for water suppliers the precise monitoring of minimum night flows is an essential part of their leakage detection activities – and the WD Series is the ideal tool for this task.
There is no method of zero drift correction for our instruments – because they just don’t drift. This also applies to the WD Series that is installed without zero calibration and remains drift-free, permanently. FLEXIM is the only company that accomplishes this, thanks to its unique combination of matched piezo-transducers and advanced factory calibration.
FLEXIM supplies the WD Series with the most robust mounting system on the market. The transducers are fixed to the pipe with broad stainless steel straps and secured in robust stainless steel housings. The transducers themselves have IP68 protection and reinforced transducer cables. A further unique feature of FLEXIM is that the transducers are connected with permanent coupling pads, instead of coupling gel that can deteriorate or be washed away. All this ensures the durability of the system and makes it suitable for both installations in chambers and buried installations.
The WD meter is available with three transducer types and is suitable for inner diameters ranging from 50 ... 6500 mm. The strong signal output and noise suppression technology make it possible to use the WD Series on all pipe materials, even on such challenging ones as fiber-reinforced plastic (FRP) pipes. The outstanding performance of FLEXIM is shown by thousands of references worldwide.
優點
- Very low installation costs and zero pipe interference
- Extremely accurate down to flow velocities as low as 0.01 m/s
- No zero calibration needed and permanently drift-free
- Permanent coupling pads
- IP68 transducers
- Transducers can be permanently buried (no chamber required)
- Drift-free measurements
- Reliable and accurate data
- Low installation costs
- Built to last
- Works on difficult pipes
技術參數
- 測量量
- Volume Flow, Flow Velocity
- 介質
- Water
- 管徑范圍
- 50mm ... 6500mm
- 流速范圍
- 0,01 m/s ... 25 m/s
- 測量精度
- ± 1,5 % of reading, ±0,01 m/s
- 重復性
- ± 0,15 % of reading, ±0,01 m/s
- 流量通道
- 1 (optional 2 for WD400, WD1200 and WD6500)
- 防護等級
- Transducers: IP68 or IP67, Transmitter: IP66
- 通信接口
- Modbus, M-Bus, BACnet, RS485, Foundation Fieldbus, Profibus PA
- 輸出
- 1x Current, 2x Binary
- 可記錄參數
- WD400, WD1200, WD6500: max. 800.000 values
會員1.png)
QQ:2568841715
鄱阳县|
湟中县|
黔东|
白银市|
呼伦贝尔市|
成武县|
朝阳市|
甘泉县|
古交市|
武穴市|
铁岭县|
老河口市|
都安|
宁津县|
清涧县|
柘城县|
沧源|
湟中县|
错那县|
马公市|
葵青区|
彝良县|
蓬溪县|
黑山县|
运城市|
甘肃省|
巩留县|
林州市|
大名县|
奎屯市|
阳东县|
汾阳市|
牟定县|
庆云县|
普格县|
吉水县|
曲水县|
闵行区|
元谋县|
鄂温|
盘山县|