? 體積小巧功能齊全,溫度穩定噪音小
Compact size with complete functions, stable temperature and low noise
? 滿足實驗室用戶對于塑料橡膠等聚合物材料或復合材料熱壓制樣的全部尺寸要求
Meet all size requirements of laboratory users for hot pressing samples of polymer materials or composite materials such as plastic, rubber, etc
? 高精密、高耐磨導柱,載荷力強,升降平穩,耐磨
High precision and wear-resistant guide column, strong load capacity, smooth lifting, extremely wear-resistant
? 采用進口KDB電熱板材料,耐高溫,耐腐蝕,傳熱快,不易變形
Adopting imported KDB electric heating plate material, high temperature resistance, corrosion resistance, fast heat transfer, and not easily deformed
? 控溫功能、控壓功能、分段排氣、溫度壓力曲線、壓力調節計算以及實時顯示數據
Temperature control function, pressure control function, segmented exhaust, temperature pressure curve, pressure regulation calculation, and real-time display of data
? 上層為鋼板,中間靠近表面處帶有插入式熱電偶
The upper layer is made of steel plate, and there is an inserted thermocouple near the surface in the middle
? 中間層為鋼制,包含一組特殊的按照功率-密度分配的加熱模塊,從而確保在整個壓臺表面非常均勻的熱量分布The middle layer is made of steel and contains a set of special heating modules distributed according to power density, ensuring a very uniform heat distribution on the entire pressure table surface
? 下層為厚度高密度陶瓷絕熱板,確保只有很少的熱量會傳輸?shù)降鬃?/span>
The lower layer is made of high-density ceramic insulation board, ensuring that only a small amount of heat is transferred to the base
容量選擇Capacity selection | YJQS/D 20/30/50/80T(可選) |
溫度控制Temperature control | 常溫~300℃ |
控溫方式Temperature Control Method | 電加熱/油加熱 |
計時器Timer | LED0~99(min) |
電熱板面積Electric Heater Area | 300*300mm可訂 |
制冷板面積Refrigeration Plate Area | 常溫~300℃ |
制冷方式Refrigeration method | 壓縮機水冷或自來水冷 |
板間距Plate spacing | 0~90mm可訂 |
體積(長*寬*高)Volume(L*W*H) | 1050*660*1430mm |
重量Weight | 約700kg |
電源Power supply | 3∮,Ac380V,20A |