Battery Impact Test Machine
Features:
1.The double track form prevents the impact hammer from falling freely due to sudden interruption of power supply; the impact hammer, regardless of the location, will not fall down due to interruption of power supply, which plays a role in safety and protection;
2.The change of the impact hammer style makes it easier to install and demount the hammer, with higher precision, which resolves the test error produced by the second impact;
3. The wire coat is covered with metal fire tube which can effectively prevent the wire from burning caused by the ignition during the battery test;
4. It is equipped with a lighting lamp so that you can clearly see the status inside the test chamber;
5. The height (25~1000mm) for which the digital display mode is used can be adjusted at will;
6. Equipped with a test hole and two additional air outlets; the additional air outlets and the exhaust fan can more effectively and quickly exhaust the test waste gas and air pressure; the test hole is designed to detect the temperature or air pressure inside the test space;
7. The controller, isolated from the test chamber, can be operated 1~2 meters away, which can greatly reduce noise and provide a certain safety measure. Since the instant sound generated during the impact test is very loud and the speed is very fast, the previous control mode would make the tester feel strident and the tester is easily frightened; the long-term test would cause a certain effect on the ears.
一. Principle: Place the battery sample on a flat surface and place a bar with a diameter of 15.8mm (5/8 inch) across the central position of the sample. A weight of 9.1kg or 10kg±0.46kg (20±1lbs) falls on the sample from a height of 1000±25mm.
二. Applicable Standards：
2.1 National standard: SJ/T 11169—1998: steel ball weight: 9.1KG (30LBS); falling height: 610mm (2 feet)
2.2 National standard: GB/T 18287-2000: steel ball weight: 10KG; falling height: 1000mm
2.3 American standard: UL2054：1997 (note: steel ball weight: 9.1KG (30LBS); falling height: 610mm (2 feet)
三. Technical Parameters:
3.1 Model No.: BE-5066
3.2 Falling ball weight: 9.1kg and 10kg
3.3 Falling height: 25~1000mm, adjustable (raise the weight to a certain height and release it and ensure the weight to fall freely and vertically, without inclining and shaking)
3.4 Bar: 15.8mm (place the steel bar the battery center vertically and breadthwise; when the weight falls on the steel bar, the steel bar keeps parallel with the battery underside)
3.5 Internal material: SUS#304 stainless steel plate
3.6 External material: cold rolled steel baking finish
3.7 Chamber body: equipped with a lighting lamp inside the chamber body, a toughened glass window on the chamber door and an exhaust fan at the rear of the chamber body
3.8 Elevating mode: by electromotion
3.9 Upper and lower impact surfaces: steel plates
3.10 Maximum battery size: diameter 200mm
3.11 Outside size: 69 X 71 X 185cm
3.12 Power supply: AC 1φ 3W 220V
四. Operational Environment:
Allowable operational environment: 0 ～ 35℃
Performance guarantee environment: 5 ~ 25℃
QQ:2568841715
孝感市|
平果县|
大关县|
赤峰市|
赤峰市|
沧源|
明光市|
长岭县|
舞钢市|
苏尼特左旗|
鲁甸县|
彩票|
府谷县|
东阿县|
平顺县|
白城市|
盐城市|
汝城县|
哈密市|
阜南县|
绥棱县|
华池县|
海盐县|
惠州市|
北海市|
岚皋县|
缙云县|
分宜县|
尤溪县|
龙州县|
汾西县|
抚宁县|
彩票|
左贡县|
酉阳|
德钦县|
安岳县|
崇义县|
神农架林区|
盐城市|
南昌县|