產品名稱

PT2619B環保型高溫熔體壓力變送器high temperature melt pressure transmitter

產品特性

PT2619B環保型高溫熔體壓力傳感器是五岳公司的研發的環保型測壓變送器，應用于測高精度，無污染的環境下，產品結合行業工藝，采用特殊彈性膜片和受壓應變片。大大降低了測量誤差，更穩定，更耐磨。本產品適用于測量高溫熔體的壓力和塑料，塑膠，橡膠，化纖等擠出機和押出機的熔體的測量。

特性：

高精度，不銹鋼材料密封，安裝簡單，穩定性好，零度滿度可調，線性輸出可直接PLC，良好的工作特性且防爆。

產品參數：

1.      測壓量程：0~5，0~200Mpa

2.      精度：≤±0.5%滿度

3.      信號輸出：0~5V；0~10V；4~20mA

4.      輸入電壓：24VDC（12~36）VDC

5.      電氣連接：6針通用性航空插件

6.      機械連接：螺紋連接，尺寸可定制

7.      膜片耐溫度：300℃

8.      過壓：1.5%滿度

9.      通過歐盟CE認證

PT2619B high temperature melt pressure transmitter

Wuyue's PT2619B series high accuracy pressure transmitters apply to measurements which requires accurate datas.this product adopted special materials and allayed elasticity diaphragm to lower the combined error. Products are applied to measure and control the pressure as well as temperature of those high temperature fluid medium of extruders for such as fiber, polyester, rubber, plastics.

Feature: High accuracy, Sealed with stainless steel, Easy installment, Good stability. Calibration on both zero and span, Amplified signal can be directly input in PLC.High performance of anti-interference.

PARAMETER:

Pressure ranges:0-5 to 0-200MPa

Accuracy: < ±0.5% FS  

Signal output:0~5V; 0~10V; 4-20mA

Working voltage:24VDC （12~36）VDC

Electrical  Connector:6pin common connector

Process connection: flange, other type on request

Temperature resistance of diaphragm:300°C

Overload pressure:1.5*FS

Wuyue's melt pressure transmitter got CE Approved