東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

PolyOne Edgetek PI-20GM/000 L Polyetherimide （PEI）材料介紹：

Milled Glass Fiber ReinforcedHigh Flow

POLYETHERIMIDE（PEI）

Advantages 
1. Continuous use temperature of 365degrees F （180 degrees C） 
2. High strength 
3. Inherently flame retardant

PERFORMANCE PROPERTIES

LONG-TERM HEAT RESISTANCE

Excellent stability of physicaland mechanical properties at elevated temperatures thanks to high glasstransition temperature of 217 °C. Available with relative thermal indices （RTI）up to 180 °C PERFORMANCEPROPERTIESLONG-TERMHEAT RESISTANCE

Excellent stabilityof physical and mechanical properties at elevated temperatures thanks to highglass transition temperature of 217 °C. Available with relative thermal indices（RTI） up to 180 °C

STRENGTHAND STIFFNESS

Outstanding strengthand amorphous thermoplastic among the available alternatives, with predictablestiffness and strength up to 200 °C. Unfilled, transparent grades are equal instrength to other thermoplastics with opacifying fillers.

DIMENSIONAL STABILITY

Among the most dimensionallystable thermoplastics available, offering predictability over a widetemperature range. Filled grades offer exceptionally high-tolerance dimensionalcapabilities.

ENVIRONMENTAL STRESS & CRACKING RESISTANCE

Unlike most other amorphousthermoplastics, Ultem resins retain strength and resist stress cracking whenexposed to automotive and aircraft fluids, aliphatic hydrocarbons, alcohols,acids, and weak aqueous solutions

FLAMMABILITY, SMOKE GENERATION AND TOXICITY

Inherent flame resistancewithout additives in most grades - exceptionally difficult to ignite, with alimiting oxygen index （LOI） of 47%, meeting UL94 V0 specifications in sectionsas thin as 0.41 mm. Generates extremely low smoke per the NBS smoke evolutiontest, with products of combustion no more toxic than those of wood.

PROCESSABILITY

Can be extruded, thermoformed,extrusion blow molded and injection molded, and flowability permits long flowlengths down to 0.2mm thick using conventional injection molding equipment.

鄭重承諾！我公司是專業原料供應商，原料均國外進口，原廠包裝，有專業人士質量檢測，原料均可提供一系列報告證明等。

因為專注，所以專業，*服務，互利共贏。是我公司一貫的經營宗指！

： 

：@139.com 

：羅

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

PEI PI-20GM/000 L其它產品

銷售Hi CB 237 G 2125 PP
PEI PI-1000
PEI PI-20GF/000
銷售Hi CB 237 G 1748 PP
PEI PI-20CF/000
銷售Hi CB 237 G 1459 PP
銷售Hi CB 237 G 1457 PP
PEI PI-10GF/000
銷售Hi CB 237 G 1420 PP